The horizontal shaft speedway GCI90 and vertical mini drill press shaft gcv190 became available through honda engine distributors nationally in april. intended for use on applications as pressure washers and lawnmowers, both shaft configurations will also be supplied to other power equipment manufacturers on an oem basis."gc engines are an increasingly important segment of our model lineup and have been press an important driver for our growth in north america," said scott conner, honda engines senior manager.as with other overhead cam (ohc) engines in this series, speedway a unique combination an internal timing belt and uniblock construction creates a light and more compact package, honda said. this simple construction also minimizes the number of moving parts, hand drill press making the engine more reliable, quieter, and easy to operate.

tipuse the jackhammer to crack the concrete, not to punch holes. if the press chisel bores into the concrete speedway without cracking it, stop and try another spot. getting a stuck chisel out of solid concrete is a cursing waste of time.rent the jackhammer''s smaller drill and press cousin, a "chipping hammer" ($30 to $40 per day), for lighter tasks: breaking up a few square feet of basement floor for plumbing work or chipping ceramic tile off a concrete floor.brad nailercost: $50 per day with compressorbenefits: better results with less time and effort.

weld wire. saw uses electrodes of continuous wire, solid or flux- or metal-cored. selection depends on base-metal composition and thickness, flux, joint design, and cleanliness. aws specifications a5. 17 and a5.23 detail filler materials for saw of carbon and low-alloy speedway and drill steels; a5.9 and a5.1, filler metals weld corrosion-resisting stainless steels and nickel alloys, respectively.hardfacing electrodeshardfacing welds a wear-resistant material to a substrate-base material that is commonly mild, alloy, or press stainless steel. hardfacings can be deposited manually using smaw electrodes; semiautomaticaly using solid wire and self shielded flux cored electrodes; or automatically by submerged-arc speedway welding. the method chosen depends drill on the size press and accessibility of the area to be surfaced.

©2003 www.drill-press.net All rights reserved.