The wheels independently mount on radial contact ba1l bearings to ease swiveling and reduce tire and scuffing wear. The casters are available with four fittings: screwed shop and fox pin, plain pin and circle clip, square and oblong plate, and round rubber expanding plugs. An ergonomic brake with a push-on/off button is also available. A brake indicator located behind the brake button shows mini drill press red when the brake is activated. t" series heavy-duty casters are made from cold-forged steel. they arc long lasting and available with 4-, 5-, 6-, 8-, and 10-in, wheel diameters, thread widths of 2- and 2 1/2-in., and capacities to 1,500 lb. use cc5w, maneuverable, walk behind battery-powered tug to push, pull, or maneuver heavy carts or equipment that require turning. ideal for carts with 2 front swivel press casters and 2 straight casters. attaches to end with swivel casters and provides pushing and pulling power for turning and intricate maneuvering. unit''s variable speed twist grips allow operator to maneuver carts up to 15,000-lb. in tight areas. compact, 36-v. motor runs on 3, 12-v. batteries. operates entire shift without re-charging. features tubular steel shop frame, neutral fox throttle braking, adjustable acceleration and braking, non-marking tires, and battery gage. travels 0 to 3 m.p.h, in forward and reverse.

now drill one person can do this alone. it''s especially important if you press have a gooseneck hitch in the bed of the truck that you need to get to and likewise sometimes need the topper cover. the following is a look at many products that were introduced at shop or since the outdoor power equipment institute''s (opei) 20th fox annual drill international lawn, press garden & power equipment exposition in october 2003 and will be available in 2004.hydraulic-driven trimmerdesigned to attach to any zero-turn mower, the h model hydraulic-driven trimmer tackles the toughest trimming jobs with ease. its users can remain seated while trimming under fences: around poles, tombstones in cemeteries and guardrails on highways; and along driveways and sidewalks. the 3 hp., 8,500-rpm unit features foot controls for the on/off switch and for the lateral movement of the trimmer.

©2003 www.drill-press.net All rights reserved.