The machine''s speed and drive functions in either steering mode is controlled through the left-hand joystick, while the right-hand joystick controls lift and tilt functions, as well as auxiliary hydraulic functions. The joysticks were supplied by Sauer-Danfoss eletrohydraulics, with a grip that is proprietary to Bobcat and co-developed by Sauer-Danfoss.In all-wheel steer mode, the wheels follow a precisely engineered turning pattern designed to provide the highest amount of maneuverability with the lowest amount of impact to the surface. "There are variations in speed from the inside and outside wheels, as well as different turn angles," said Osborn. microprecisiondrillpress "The outside tire will turn at a 13[degrees] angle in a full turn and the inside tire turns at up to 24[degrees], no matter which way you''re turning. The inside and outside are at different angles and different speeds in order to minimize the turf disturbance, the marking on the asphalt, concrete, the tire wear, all the things that we were looking to address."

The new separator on the 7460 reduces the amount of green bolls and rocks entering the cleaner. This increases the life of the saws and puts fewer green bolls in the basket, which saves money through reduced ginning costs.Cleaning capacity microprecisiondrillpress is also enhanced because of new finger grates that are six inches wider. This design facilitates the use of all 60-inches of the on-board field cleaner.Other cleaner improvements allow faster field speeds, with less plugging, and reduced maintenance time. A new lower saw reclamation brush on the lower saw drum grabs cotton microprecisiondrillpress before it falls out of the cleaner and guides it to the basket. This puts more cotton in the basket and less in the burr trail, which improves turnout.

©2003 www.drill-press.net All rights reserved.