SDS-max hammers are designed for larger holes, in the 3/8- to 2-inch range.Spline hammers are similar to SDS-max hammers in capacity but use a different chuck. (Because they''re similar in function, SDS-max and spline hammers are often referred to collectively as "combination hammers.")In all cases, the recommended maximum hole sizes are for spiral bits. Going instead to a core bit--essentially, a hole saw for concrete--will let you make a industrialdrillpress substantially larger hole, but don''t get carried away. Consistently using a rotary hammer at or near its maximum capacity will shorten its life. The industrialdrillpress relatively high failure rates of both SDS-plus rotary hammers and hammer drills can be traced to the tendency of users to overwork them.

Name valve_positionType queryParams valve (process/pps_select)Outs value (for process:primary/secondary/purge/off/unknown;for pps_select:pps/tank/reject/off/unknown), industrialdrillpress and result(okay or Err)Function: Checks V02 or V03. One of lines V02_i1 through V02_i3 orV03_i1 through V03_i3 will be hi, and the rest will be low. If allare low, the result is off. Any other pattern is unknown.Name valve_atType industrialdrillpress eventParams valve (process/pps_select), value (for

©2003 www.drill-press.net All rights reserved.