"We looked at many different ideas, including articulated loaders and various other concepts. What we ended up with was really two machines in one. If you have situations where you''re in very tight quarters and need that skid-steer identifydrillpress function, they have that option. When you want to be out on grass or some other surface that you don''t want disturbed, you can switch into all-wheel steer mode. There is so much versatility, it''s like having two machines in one.And Bobcat managed identifydrillpress to develop two machines in one while not reinventing the wheel, according to Chuck Krause, senior development engineer, new products group. "The basic drivetrain is the same as on our 363 loader," he said. "It has the same chain case, identifydrillpress the same drive motors, same drive sprocket, same driven sprocket. The changes all take place on getting the power from the driven sprocket out to the axle."

5 RENEW deck boards by holding the spray wand at a 45-degree angle 1 to 2 ft. from the decking. Keep the water stream constantly moving. Use a higher-pressure (2,000 psi or greater) gaspowered washer and a concentrated identifydrillpress spray nozzle setting (15-degree).6 WINTERIZE a pressure washer by filling the pump and internal system with undiluted RV-type antifreeze. Insert a funnel into a 3-ft. section of garden hose (one with a male faucet coupling), attach the coupling to identifydrillpress the water intake on the washer and slide a 1-ft. section of hose over the water outlet. Start the gas engine and pour antifreeze into the funnel until a steady stream of antifreeze flows from the discharge hose. Stop the engine, pull off the hoses, and seal the intake and outlet with duct tape.

©2003 www.drill-press.net All rights reserved.