| ellis drill press | drill press | ||||||
As the marketing manager for a power tool company, I''m often ellis asked about the difference mini drill press between hammer drills and rotary hammers. buyers want to know why there''s press such a price difference between the two, and which tool is best suited for specific applications.i advise users to answer four questions before making the choice: what material will you usually be drilling? how large will the holes be? will you be drilling an occasional hole or for extended periods? finally, will you only be drilling, or would it also be useful to be able to use the tool in chipping, or hammer-only, mode? gtaw torches come air-cooled and water-cooled. their heads align in-line with the body or at 90, 120, or 135 degrees to it. nozzles, specified by inside diameters, run ellis 1/4 to 5/8 in. vendors offer special designs: longer to give improved drill accessibility to the weld joint, or wider to extend shielding gas coverage.saw guns come in three-types-side, concentric, and deep-groove flux press delivery.in oxyfuel welding (ofw), heat comes from burning gases, rather than arcs, torches ellis hold separate tubes drill for fuel gas and oxygen, blended in a mixer assembly. a torch assembly comprises a handle press (aluminum, stainless steel, or brass); a mixing chamber; and a brass welding tip or cutting head. light-duty torches weld sheer metal to 3/16, in. thick; medium, to 1/2 in.; heavy, 1/2 in. and up. ©2003 www.drill-press.net All rights reserved. |
|