The cutting system features a four-sided bed knife and a thick cutter disc for greater duracraft cutting inertia. Maximum cutter disc speed is 1835 rpm with the gasoline engine options and 1910 rpm for the diesel. The cutter wheel does not start turning until the operator pulls a handle to shift the mini drill press idler pulley which tensions the belt and the cutter wheel. the belt engagement handle drill is located directly to the left lower corner of the engine.

long, are stored press at rear of bucket when not duracraft in use. the tlb-535 heavy-duty compact tractor loader backhoe offers a 6000-pound digging drill press force that enables the machine to achieve an 11-foot depth. its dual-cylinder, 180-degree hydraulic drill cushioned swing suits the backhoe to precise work in tight quarters. an added safety feature is an exclusive press heavy-duty boom lock that can be engaged or disengaged from the operator''s seat. the transmission, which is equipped with servo-control, adds control capability as well as reduced pedal effort in forward or reverse. a load-sensing steering system ensures hydraulic flow only when the wheel is turned. terramite''s t7 compact tractor loader backhoe now comes standard with a 26-hp. duracraft kubota or 20.3-hp. caterpillar diesel engine. this model has extended-reach drill arms for a 96-inch press dump height and a high-capacity front loader bucket with dual front curl cylinders for faster duracraft and cycle time. front and rear work lights and center-mount steering are standard features. the t7 is equipped with super terra grip front and rear tires for better traction and maneuverability. it also has a 180 degree swing on drill the backhoe. t5c features quick-change backhoe buckets press in 8- to 38-in. sizes with 1/2-in. thick carbon cutting edges and cast steel replacement teeth. digs to 8 ft., 4 in.

©2003 www.drill-press.net All rights reserved.