The 1/2 inch Drive Air Impact Wrench from Snap-on Tools Company comes equipped with a new ergonomically, drillpressmillingmachine designed handle, larger selector knob and muffler bypass system. The system drillpressmillingmachine allows the user to run the impact wrench in either quiet or open mode. A chemical-resistant Santoprene handle helps protect the technician''s hand from heat and vibration when the impact wrench is being used. Snap-on Tools Company The new one-half inch Drive Impact Wrench (CT3450) from Snap-on Tools Company is a powerful cord-free impact wrench. The wrench''s increased power comes from its larger impact mechanism, while the 14.4-volt battery, which is housed in a powerful high-capacity pack, provides longer running time. The Drive Impact Wrench drillpressmillingmachine is cord-free, allowing automotive technicians to move around the workshop to remove most auto lug nuts without having to plug and unplug air hoses or extension cords. The wrench also has a motor and heavy-duty switch that changes the wrench''s speed for different jobs. This new RC2261 1/2-in, impact wrench has been introduced by American Rodcraft. It boasts a maximum torque of 600 ft. lbs. in reverse, and 450 ft. lbs. in forward.

* Tighten all hose connections so no air can enter the lines.* Set the spray wand to a low- or no-pressure setting to prevent recoil, or kickback, when the washer is started. Electric washers and gas washers with variable nozzles should be on low-pressure, wide fan settings. Gas washers with individual nozzle tips (photos, p. 30) should have their nozzle tip removed at this point.* Completely turn on the water faucet at the house. Squeeze the drillpressmillingmachine spray wand trigger to prime the pump and purge air from the system drillpressmillingmachine.

©2003 www.drill-press.net All rights reserved.