STORAGE: Mud & Cmt Bulk--8 x 42 cm; Sack--900 cm;Liquid Mud--330 cm; Fuel--794 cm;Water for Drilling--876 cm; Potable Water--410 cm.DRILLING, EQUIPMENT: Drawworks--one Nat''l1320 UE; Pumps-two BPMMP F-1600 mini drill press primemovers--four cat. 3516, 1,650 hp; rotary table--nat''lc-375; top drive--varco ids-1,500 t.derrick: 147'' x 30'' x 30''.bop system: hydril, 2,000 psi 21 1/4" and 5,000psi, 13n" annulars; two ciw, 13 5/8", 10,000 psi.cranes: two amclyde, 10,000 hd, 100'' boom.work area: south china sea.nan hai no. 4

the new 60 series combines are powered by 6.8l, 8.1l or 12.5l john deere powertech engines. the engines are designed with a power bulge feature to get extra torque press and power when harvesting through tough conditions.they also feature an unloading power boost to guarding gain an additional surge in power when unloading on-the-go to maintain ground speed and threshing capacity. operators will get extra power and productivity when needed because of the power bulge and power boost features designed into the powertech engines.

circle drill press 105 on inquiry card this whole-house hepa filter packaged system easily installs on the return air side of a forced-air system. it comes complete with a high-efficiency press pre-filter, guarding a true hepa cell and a blower/motor assembly. the cell can remove 99.97% of particulate at 0.3 microns in the airstream. a five-year warranty is offered hand drill press on all press electrical parts. enerzone. circle 106 on inquiry card the drain-rooter ph drain cleaning machine features a power cable feed and variable speed motor. the unit can be operated in both horizontal and vertical positions to get closer to the guarding drain opening. drum speed can be varied by changing pressure on a foot pedal, making it easier to thread the boring head through strainers and crossbars. users can vary the feed rate from 0 ft./min, drill to 16 ft./min. the unit weighs 22 lb. general press wire spring. guarding ed-w is a line of wide-pitch retractable ducting hat features drill stitched construction. it press and guarding can be fabricated in sizes up to 36-in. for moving large volumes of air under positive pressure. the ducting can be fabricated from a wide variety of materials such as vinyl-coated polyester, silicone-coated fiberglass and metallized fabrics. heat-resistant threads enable the ducts to handle temperatures up to 1,000 [degrees] f. hi-tech hose.

©2003 www.drill-press.net All rights reserved.