System--MH-1899 Iron Roughneck; TopDrive--Nat''l PS2-650/650 power swivel.DERRICK: Loadmaster 170'', 1,500,000 lb.BOP SYSTEM: Shaffer mini drill press 13 5/8", 5,000 psi ann.; twociw tl 13 5/8", 10 k doubles; diverter--hydril press msp500-30".cranes: three flex letourneau 50 t, two w/ 100'' booms, one w/120''.remarks: five bay ross hill shafts and hand drill press scr control system;zero discharge, 70'' cantilever reach.work area: n/achiles magellanrig design: letourneau press super 116.performance: water depth--380'', leg length--544''.construction: amfels shipyard, brownsville, texas, 1999.

[figure 2 omitted]in each of the previous flex efforts, the 3t shafts and drill press team press from ar&sd was required to interface the ai architecture to existing legacy software and hardware systems (schreckenghost et al. 1998a). in 1999, however, we began to support advanced water-recovery projects that were being built from the ground flex up. as shafts a charter member of drill the press water research group in ctsd, the ar&sd ai team flex was influential in the selection of hardware components and the design of the overall control of these systems. for the first time, we were able to build the full 3t system from the a/d converter boards shafts used by the sensors and devices to the top tier of the architecture.

©2003 www.drill-press.net All rights reserved.