Jeff/KTR: Prevent rust and make sure fasteners are mini drill press tightened to the specified torques after a press minimum operation time. replace the device if it starts to slip. reconfirm the selection, and be sure to check the dimensions and surface finish of the bore and shafts.doug/zero-max: arbor and drill and press keep the connection screws properly torqued for maximum holding forces, and use a connection with a minimum number of adjusting screws.jim/stafford: replace socket screws when sockets become worn. don''t use wrenches with rounded corners. don''t use a screwdriver to spread collars, or a hammer to move arbor them along a shaft.keith/u.s. tsubaki: higher quality drill locking devices are practically maintenance-free. there press is no need to periodically retighten locking bolts or replace the unit, even in high-vibration applications. end users can extend service life even longer by keeping exposed surfaces clean and corrosion free.

club selectioneach golf tournament has its own unique needs to be considered during course selection, but the main question to ask yourself is, "what are we trying to accomplish?" for example, if you''re planning a corporate networking event, you will probably want to spend a little more for a high-end golf course -- not only to draw more players, but for the arbor memorable experience you want your guests to take home with them.if the tournament is a fund-raising event, you will want to balance the costs of renting the golf course vs. the amenities available there. do you need to play at drill a name golf course? is a high-end clubhouse press necessary, or will a good course with minimum facilities suffice?

jim/stafford: early design involvement on the part of the manufacturer is the best way to make sure the resulting component will be reliable and effective.jeff/tollok: carefully review your application requirements. shaft material, hub material, transmittable torques, and bending moments can arbor influence your selection of the proper locking assembly.intelligent designwhat can designers do when selecting and applying locking drill devices to improve productivity?jeff/ktr: obtaining comprehensive technical information will improve selection and performance. find a manufacturer that maintains the quality of materials, dimensions, and surface finishes.jeff/tollok: too often not enough questions are asked, and selections are made based on press previous designs. don''t use the same locking assembly simply because it was used elsewhere on the same machine or on a previous machine design. involve your supplier and use their experience to get recommendations arbor.

©2003 www.drill-press.net All rights reserved.