At first, I was wary. My feminist sensibilities are slightly offended whenever a mom on the playground says proudly of her son, "He''s all boy! He loves trucks!" Isn''t there more to being a boy than loving trucks? Would a girl who loves trucks be all boy, too? Haven''t we come further than this? Surely my cheapdrillpress son, coming from our enlightened, nontraditional family, won''t have a truck gene. Wrong. There is no escaping Riley''s enthusiasm.

EMD MD 16 EB-645, one EMD MD 8EB 645;Rotary table: Nat''l. 37 1/2"; Top Drive--Varco TDS 3.BOP SYSTEM: 13 5/8" x 5,000-psi; Shaffer specialannular; 13 5/8" x 10,000-psi; CIW Type U doubleram; 13 5/8" x 10,000-psi; CIW Type U single ram;Hughes KDFJ cheapdrillpress 27 1/2" diverter.CRANES: Two Nat''l. OS-105 Pedestal w/100'' booms.DERRICK: 160'' Derrick Int''l.; 1,000,000 cheapdrillpress lb hookcapacity. Support rails to full height for Varco TopDrive drilling system.TOWING REQUIREMENTS: 12,000 hp.REMARKS: Formerly Cliff''s Marlin 17.

The first step in assuring proper installation, after proper material selection, is mixing the refractory. However, in order in to properly mix it you must know how you intend to install it. There are four fundamentally different ways to install refractories:* The gunning method permits the handling of a large volume of materials. Water is added at the discharge nozzle or back at the charging chamber. The amount of water is determined at the point of installation by the nozzle man and also by the characteristics of the refractory. Forms are not required. The advantages, of course, are speed and versatility. Rebound losses mean that more material will be needed than for casting. Overage will vary considerably depending on whether a ceiling, a wall or a floor is being installed.

©2003 www.drill-press.net All rights reserved.