To assist the operator in adjusting the combine for various crops and conditions, a new TouchSet automatic combine adjustment is available on the new 60 Series STS combines. All required separator crop settings, including the all-new remote shoe adjustment, can be adjusted with the touch of a button in the cab."TouchSet hydraulics are standard on all STS combines. This advanced hydraulic system uses an independent control valve to enable the operator to have infinite variable control over the feederhouse and header raise-and-lower rates. Two control knobs under the armrest console provide convenient operation caidrillpress and the header can be raised manually or automatically."

Another important thing to consider is minimum hub thickness, which is calculated based on such factors as locking device outer diameter and surface pressure. The hub should be thicker than this value to prevent excess stress and early failure. Locking device manufacturers caidrillpress typically provide this formula.Andrew/Whittet-Higgins: Consider all costs of the assembly rather than the individual costs of each component.Keith/U.S. Tsubaki: Go keyless. Keys and splines weaken the shaft by cutting into it, requiring a larger shaft and accompanying parts, such as bearings, to handle the higher forces.End-user adviceWhat should END USERS do to maximize life and productivity?Carl/Ringfeder: Pay close attention to the OEM''s service instructions and use the locking device manufacturer''s technical information caidrillpress to help with replacement or reinstallation. Warren/Fenner: In general, locking devices don''t require any maintenance or special attention to caidrillpress maintain their performance and maximum life.

©2003 www.drill-press.net All rights reserved.