New toolsSomething I found quite exciting, and truly new, is the Electronic Manifold Plus from Robinair. It''s a digital electronic refrigerant gauge with a built-in thermometer that provides pressure readings with an accuracy of +/1/2%! It also gives the saturation temperatures for 13 of the most common refrigerants. In addition, it can calculate superheat and subcooling temperatures for each of the refrigerants.Another tool -- but not a new one -- is Imperial Eastman''s Quick-Tite Ratchet Wrenches (they come as a set of different sizes). These circular ratcheting tools are made for tightening refrigerant-line-coupling nuts to condensing units and evaporators, and have an arm that opens up to go around the lines.

The trowel method is a hand-applied application generally used for thin lining (i.e. ladle tops at the pour areas). The amount of water will vary with the type of refractory and must be just enough for the material to be sticky and stay in place. An important thing to pay attention to when troweling is to avoid over troweling the finished surface. This will bring cement to the surface and have the effect of sealing the refractory, thus restricting the escape of water vapor, which occurs during dry out. Sealed-in moisture can turn to steam during dry out and explode the lining.

The unique triangular design of the boom allows for infinite nozzle-tip spacing and nozzle-tip protection benchdrillpress while spraying benchdrillpress in the field. Visibility benchdrillpress from the cab is exceptional and, when traveling from field to field, the boom sits snuggly in a transport cradle.Drawbar benchdrillpress hitchIf you''re a producer with a 9000 Series "bareback" tractor or any tractor without a two-point hitch, then John Deere''s new factory-installed optional drawbar hitch is designed for you.The optional drawbar hitch has been developed for use with 177ONT, 16-row, 30-inch; 177ONT CCS 16-row, 30-inch and 1790 planters. This drawbar hitch is the economical choice instead of adding a two-point hitch to the tractor.

©2003 www.drill-press.net All rights reserved.